763 won't start

Help Support SkidSteer Forum:

Oukachiru

Member
Joined
Jun 13, 2020
Messages
6
Was out in the field and went to restart bobcat. Panel turns on but on full key turn there is a pop sound and the panel dies. Panel won't cone back on unless battery is disconnected and reconnected.

Replaced battery, same issue.

Popping sound is coming from somewhere in engine compartment I think, but can't turn key and look at same time.

Any thoughts on what to check next?
 

reaperman

Well-known member
Joined
Dec 18, 2011
Messages
598
Possibly the "switch power" relay, number 15. Swap that relay with another like the headlight relay. Its simple to do. The fuse box is between your legs a few inches down from the seat. There are two 9/16 bolts holding the cover on.
 

Latest posts

Top