HI, I hope I'm not stepping on any toes by not starting a new thread. I have a case sr200 and just bought a Bradco 509, new to skidsteer stuff. The guy I bought it from loaded it on my trailer with his Bobcat and pulled up the outriggers just fine. I unloaded it with my Case, I went to hook it up to my aux couplings and could not get the unit to move at all, any of the functions. After 4 hours of trying to find hydraulic diagrams on the web with no luck I switched the coupler ends and found that it would now work with the idle raised about half but slowly, If I idle it up more it will work faster but still not enough to lift my unit up with the outriggers. NOW im thinking I should check the filter on the backhoe to see if it is clogged. Any thoughts or suggestions? The unit is very clean and doesn't appear to be previously abused .