Reply to thread

Message: <blockquote data-quote="Old753" data-source="post: 105152" data-attributes="member: 16234"><p>Yeah, I was told I needed to remove the engine and pump to fix my issue, so glad I didnt. Very unfortunate that you have to remove the drive motor for a second time, its not an enjoyable job. As for replacing the drive motor seal kits it is nothing to be scared of, its only a couple of o'rings and nylon/plastic cups. These are my suggestions (which I learnt from others, or by making mistakes myself) to ensure it all goes smoothly. 1. Mark all the sections of the housings with a punch to ensure they go back in the same orientation. 2.Be careful not to loose the 2 ball bearings that fall out when you seperate the , they fall out if you turn it upside down. 3. Buy an oil stone and gently clean up all the mating surfaces. 4. clean eveything meticulously before re-assembly.</p></blockquote><p></p>