I had a tread about the machine not running and after checking everything twice and three time i came to the conclusion that i had a bad intake manifold gasket. I put the new one in tonight and put it all back together. I started it up and walla it ran, little rough at first but it was running with no choke so it was better than before. After it ran for about 2 minutes or so the motor just took off full bore so i turned the key off waited a minute and started it back up did the same thing. I checked the Governor for oil and it was dry. I filled it up and now it just idles??? I am going to check ignition timing tomorrow and reset the float to only allow about 1/2 bowl of fuel.
