Reply to thread

Message: <blockquote data-quote="mitsubishiparts" data-source="post: 12314" data-attributes="member: 1412"><p>Here is a update, I've bought the carb kit from Napa ($35), cap and rotor (maybe $20), After replacing what I could in the carb and doing the cap/rotor it fired right up once it got fuel, They also had the exhaust manifold gaskets for $11 and it made it MUCH quieter. Now that its running quite well (it does have some blowby as evidenced by the blue smoke coming from that breather), I want to replace the belt, I can tell the jackshaft is working because the machine is useable but not on "low speed" only when the belt is tensioned up some, I assume this is from a worn belt, it does flop some on the low setting. I was amazed at the stiffness of the new belt and I'm sure it will help a LOT! If anyone can send me a scanned picture of the repair book section for the belt that would be great!!! mitsubishiparts@yahoo.com I was using the bcat today and I broke a tilt hydraulic cylinder, I measured it and it looks to be a 24" x 2.5" and it was $150 from northern tool, are there any other places you can think of to buy these?</p></blockquote><p></p>