Apr 25, 2018 #2 E eyebrowski Active member Joined Apr 18, 2018 Messages 31 I'd like to make a valve to drain the fluid out of my machine. Does anyone have the thread size on this plug?
I'd like to make a valve to drain the fluid out of my machine. Does anyone have the thread size on this plug?
Apr 28, 2018 #3 alchemysa Well-known member Joined Mar 29, 2016 Messages 203 I don't know the size but its exactly the same size as the breathers that are on the top of the chaincase directly above the oil drain plugs. You should be able to easily remove one of the breathers and measure the thread.
I don't know the size but its exactly the same size as the breathers that are on the top of the chaincase directly above the oil drain plugs. You should be able to easily remove one of the breathers and measure the thread.
Apr 28, 2018 #4 S shankatank58 Active member Joined Dec 14, 2013 Messages 34 I have a 444 and a either 500 or 600, and they both use a 3/4 NPT. I'm sure a 610 would be the same. It will measure right at 1" across.
I have a 444 and a either 500 or 600, and they both use a 3/4 NPT. I'm sure a 610 would be the same. It will measure right at 1" across.