Reply to thread

Message: <blockquote data-quote="Straydog" data-source="post: 61018" data-attributes="member: 6919"><p>If I did go with plan I would be using road type tyres, not the r4 tread type. I'm using it on hard ground so I'm thinking that should be ok. I've seen quite a few skid steers with a fairly smooth tread pattern being used. Old 16" tyres are easy to come by but 16.5" are nearly impossible. My concern though would be the strength of a rim from a 4x4 after it has been welded.</p></blockquote><p></p>