Reply to thread

Message: <blockquote data-quote="LLC" data-source="post: 52306" data-attributes="member: 7096"><p>it is the left side that is a 1/2 hose that is held on with hose clamps that goes from the left hand motor to the left hand side of the pump . I put a gauge in the hose had no pressure out of the pump. When i put it on the motor it pegged the gauge instantly which i suppose aint the correct way to do it by capping off the end it goin to build up pressure . It drives and operates fine. I does squeal when you are using the aux. hydrualics when the cylinder gets to the end of the stroke</p></blockquote><p></p>