Wild-bobcat S205
Active member
- Joined
- Feb 17, 2014
- Messages
- 30
I parked my bobcat a week ago and when I turn the key nothing happens. I tested the battery and it is fine. Using a volt meter. I tested the wire from the battery to the start and its fine. I tested the 100 amp fuse above battery and its fine. I checked all the fuses below the seat and they are all fine. There is power to the cigarette lighter/power port. The interior light works fine. The lights won't go on. Nothing works at the control panel on the left nor the turn key on the right. Both completely dead. I looked at all the connections to the control panel and turn key and they are all good. All the wiring everywhere in the cab looks good. I took apart everything in the cab under the 'carpeting' and all the wiring looks good. I looked at all the wiring I could find in the engine compartment and everything looks good. I took out the battery and cleaned all the connections. I took apart many other connections and ground wires and cleaned them. I cleaned the connections on the 100 amp fuse. Still no change! Any ideas as to what is up?