2006 Cat 267b Seat Belt light

Help Support SkidSteer Forum:

J-Cat

New member
Joined
Jul 1, 2022
Messages
2
Hey guys,

New to the forum so had a question about my 267b skid steer.

Replaced left side drive hose yesterday. Topped off hydraulic where I lost fluid. Set the cab back into place and bolted down.

Issue:
Jumped in cab, pulled down bar, turned key over and started up. Let the machine run for about a minute, press parking break switch and nothing happened. Seat Belt light never went off before hand notify weight was in the seat.

Unplugged switch under seat, put jumper wire on each side of the plug, restarted, press parking brake switch.....nothing. seat belt light never turned off and parking brake never disengaged.

Where do I start??
 
OP
OP
J

J-Cat

New member
Joined
Jul 1, 2022
Messages
2
Also....this is the first time this has happened. Have never had this issue. Replaced hose, them this. After further looking, the seat switch is working fine. It's the arm rest switch acting up. It normally turns off the seat belt light, but does not now.
 
Last edited:
Top