2002 john deere 240 Gauge cluster is not working. Cant engage bucket.

Help Support SkidSteer Forum:

Jrock705

New member
Joined
Jan 7, 2025
Messages
2
It was running fine. Sat for 2 weeks got in started it normally, push the parking break and it started. Went to push the black part of the button to disengage the parking break and start the bucket and arms and the feet are stuck. Then I noticed the gause clusters are off besides 2 red lights that don't have to do with parking or bucket. Iv looked through everything. I can't find the F4 interlock fuse anywhere. I only have 3 fuses and three relays. Looked for bad wires and couldn't find anything. Any help would be great. Iv looked through wire diagrams and I'm stumped on what to do next.
 
It was running fine. Sat for 2 weeks got in started it normally, push the parking break and it started. Went to push the black part of the button to disengage the parking break and start the bucket and arms and the feet are stuck. Then I noticed the gause clusters are off besides 2 red lights that don't have to do with parking or bucket. Iv looked through everything. I can't find the F4 interlock fuse anywhere. I only have 3 fuses and three relays. Looked for bad wires and couldn't find anything. Any help would be great. Iv looked through wire diagrams and I'm stumped on what to do next.
Had similar problem, thought my battery was dead, charged it and everything worked, until battery went down again, turned out alternator was bad, replaced that and it's been good ever since, other than battery light continues to be lite red. It isn't effecting the way the machine works so I chose to ignore it. Hope that helps some.
 
Top