I'm looking at buying an 1845C but it does not have the auxiliary hydraulics,,,can a person find all the parts it takes to install it? Has anyone made up their own auxiliary kit and had success with it? Thank you.
If it's anything like my 1835B. It seems pretty straight forward. They pressure side is t'ed off the charge pressure line where it enters the lift and roll control valve . The return line goes into a port on the side of the Lift/roll CV.
1 Spool 15 GPM Cessna Double Acting Control Valve 30501-AAB
I'm 99% sure this is the same control valve that is in my skid steer to control the auxiliary hydraulics. From there you would just have to fab up the foot pedal and bracket.