Recent content by ziegler

Update: I found a 1/2" rubber compressor foot pad that worked great.

I have a Skat Track 13000HD with a v1902 engine. The radiator is mounted with two rubber discs on both sides of the frame mount, assuming for vibrations. Any idea what I can replace them with? 10mm center hole/10mm bolt 35mm OD I'm not sure on the high, but I will alter whatever I can find...

Did you call the Volvo dealer yet? They e-mailed me a 1300HD scan.

I have a Scat Track 1300HD with a v1902. When I bought it about 10 years ago the head was cracked & all injectors were bad, so they were raplaced. Now I am having an overheating issue at full throttle & have to add coolant. If I pull the throttle back to about 1/2 too 3/4 for a few minutes the...

I picked up a Scat Trak 1300HD with a V1902 that smokes bad & has no power. The previous owner had the head gone through - new valves, springs, seats.. Compression test #1 = 390psi, 500psi w/40wt #2 = 320psi, 400psi w/40wt #3 = 290psi, 390psi w/40wt #4 = 320psi, 400psi w/40wt I talks to the guy...

If everything works out I will be picking up a 1300HD soon. Looking for any information or PDF's that you can share. Has a v1903 and there are wiring problems, what is needed to make it start relay-able - just 12v to the starter solenoid & glow plugs or is there more need - manual fuel pump and...