Recent content by WyoLetrBuck

So the fix was super simple. The shop tested the fuel shut off solenoid and it was good. Ran some more tests and found power wasn't getting past the middle part of the machine. Tilted the cab and under some hydraulic lines the harness had come unplugged. Nothing super hard, just needed to lift...

It'll be interesting to see what they find out. I'll make sure I post the cure when and if they find it. I hope they don't try to go throwing wiring harnesses at it. The shop is actually pretty good, but I don't know any of the mechanics anymore.

Well it wasn't any of the relays. Local Bobcat dealer sent a green tech out. He wanted to flip the cab, but it's almost impossible with the arms down to get to the cab bolts. I told him just take the cylinders loose and lift and lock it but he didn't even have a crane on his truck. Did...

So, even though it should've been one of the first steps, I'm going to switch out some relays in the cab and/or test them. I did pick up one new one from Napa. The instruction manual is horrible at labeling these. Instead of numbering them and then have the number and the labels below, they...

And I drive through ND every couple years heading out to Minnesota. Guess that makes us equal.

New here, hoping to find a good troubleshooting resource and possibly pass on some information that could help other members as well. Located in the cowboy state, Wyoming, for those who thought Texas. Hope to get some useful information pried out of this forum. Thanks again.

Like the title says, I was working the machine pushing snow and it just died. Turns over just fine, no white smoke, no start. Power to all gauges in cab. Installed new fuel filters and fuel pump. Cracked fuel lines to injectors, no fuel coming out. Battery is good. Tested hot wire to fuel pump...