WyoLetrBuck
Member
- Joined
- Jan 15, 2023
- Messages
- 7
Like the title says, I was working the machine pushing snow and it just died. Turns over just fine, no white smoke, no start. Power to all gauges in cab. Installed new fuel filters and fuel pump. Cracked fuel lines to injectors, no fuel coming out. Battery is good. Tested hot wire to fuel pump while cranking, no power. Tested fuses and all good. Haven't tested/switched relays in cab yet. Found 70 amp relay on firewall behind battery, don't know what it does, but tested good. I'm at a loss here. Must be missing something. Maybe crank position sensor, but why no power to lift pump? Wanted to check with the internet before calling a service tech, who is two hours away, and getting a nice little bill. Thanks again guys/gals!