Recent content by Waynard

Found the problem. It was a one way unhooked linkage issue not easily noticeable.

no, the linkage seems to be working properly.

I just changed the fuel filter, purged the system and started the engine up only to find it runs at full revs with the control lever in the idle position. What happened? What should I look for? thnx

here's my problem. My main boom is stuck in the down position. The solenoid checks out ok. At this point it is completely removed anyhow. The spool valve will not pull out of the valve body into the rise position. It's stuck. It started out sticking a bit on the pedal and then got worse to the...

I have an older 763 G series. Problem started a few days back when lifting the boom it felt like the pedal was sticking. Had to kick it pretty good to get the boom to rise. Now nothing. The bucket is on the ground and will not rise. Tilt seems to work. I see that there is a solenoid on the...

Hi all, New to this forum, (and, apparently, posting properly...) and skid steers. Well, actually I owned one about ...35 years back, for a short while, in the days of gas engines. I am wondering where there are resources, videos, tips or how to's on the web with regards to operating a 763, that...

Hi all, New to this forum, and skid steers. Well, actually I owned one about ...35 years back, for a short while, in the days of gas engines. I am wondering where there are resources, videos, tips or how to's on the web with regards to operating a 763, that I just bought. I have seen all the...

Hi all, New to this forum, and skid steers. Well, actually I owned one about ...35 years back, for a short while, in the days of gas engines. I am wondering where there are resources, videos, tips or how to's on the web with regards to operating a 763, that I just bought. I have seen all the...