Recent content by TonyCT322

Thank you. I’ve watched it. Looking for personal experience with a brand. It’s a lot of money to spend and I want to do it once. Most reviews I’ve seen were cheap tracks that did not hold up.

I have a 2007 CT322. Belt broke in track. Went to dealer and was told tracks are obsolete. These are the original 400 mm oem block style rubber tracks. Looking for recommendations for a high quality track with good wear. A universal style similar to what is on it. Mostly dirt/mud use. Any...

Take someone with you that can be objective. It is too easy to fall in love with the idea of a skid steer. Remember, they were ori”construction” grade equipment. Parts and service can still have “construction” pricing. If you have never owned one, they can be intimidating when it’s time for the...

I’ve kept notes of trouble shooting suggestions from other users for when I run into problems. When mine did this it was both of the selonoids under your feet. They control the boom, bucket and a third one on top is for the auxiliary hydraulics. Look at the dash when you get in. Does the seat...

I agree rent before buying. I wanted a dump trailer for some time and had narrowed down my needs. Or so I thought. Rented one for Christmas weekend and had four days to see what it would and couldn't do. I am better prepared to make that next purchase. I rented wheeled skid steers for a variety...

Check the condition of your hoses while you are there. Will need to drain the radiator to replace the pump. Not familiar with the bobcat. I did my John Deere last year. Radiator had to be removed to gain access. Once it was out of the way there was “plenty” of room to work. Definitely look over...

I went through this with my CT322. If it is not a safety sensor or a bad control panel, then there is a lock code that will disable the machine. If the previous owner did not change the code you can try these. Mine were changed and the dealer had to replace the control panel. Default unlock...

I hope by now you solved it. On my 2007 CT322 the selonoid is in the valve body located under the cover between your legs. There should be 3. Auxiliary, bucket tilt and arms lift. Dealer can tell you which one. Remove wire harnes, unscrew selonoid and replace.

you need to make sure your seat switch is being activated as well as your seat belt switch. Check the safety switches. A good test for the seat switch is: Get in the machine with the key off. Did the display lights and guages come on? If not you have a problem with the seat switch. It is in...

Start with the obvious. My CT322 has multiple safeties that lock out the hydraulics. Parking brake, hydraulic lock, seat switch, seat belt sensor, door sensor are the primary ones. Are you getting any error codes or lights to narrow it down? As suggested check fuses and relays. Check hydraulic...

Here is a picture from their website. I went with this one due to the longer spring. It gave me more mounting options and clamps to the hose which controls the slack.

Should be. My CT322 had it originally. Along the way it was removed and standard handles put on before my owning it. From what I can see, no modifications were required.

You are correct. I have a CT322 (tracks) that functions the same. You can swap the hoses so it opens/closes to your liking. Right or up for me is open. Left or down is closed. You can push it all the way down to lock it in place. This is how I run my brush mower. The solenoid is tied to the same...

I recently purchased on from the manufacturer of my after market bucket. Buy local if you can. Shipping was $150.00. Almost half the cost of the bar. They included all hardware (nuts and bolts) and it was a perfect fit. I used a floor jack to lift it in place and bolt it on. Less than a 30...