Update for ya'll. I have pulled and inspected the interlock stem, both of the lockout valves in the BICS valve, and the check valve. Did not find anything wrong with those. Ran my own wires from the from the battery to the interlock solenoid and did not have any change in operation. I am running...
Working on a Bobcat 751 and the machine will lose lift/tilt functions after 10-20 minutes of use. The pedals are still able to move but all they do is load up the hydraulic system with no action from the loader and bucket. Looking at the BICS module behind my right arms and all lights are solid...
What would be would be a good way to test that solenoid? I believe you are referring to the solenoid under the cab at the front center of the chaincase. Would putting 12 volts to the hot wire with something like a power probe work or is that not the correct voltage for it.
Working on an older 763. Encountered this issue when getting off to open a garage door and got back on. Machine would lock out of moving forward after getting back in from opening the door. Reversing slightly and trying to drive forward again seemed to unlock it and had no issues with drive...