Recent content by tgeger

Thanks Tazza, I will check that also. There is alot of play in the linkage. The bushings that are where the linkage connects to the bar that the hand controls connect to are pretty worn. Probably the same at the other end. I got the pivot pins out today, pins and bushings are pretty worn. Thank...

Thanks OldMachinist, I really didnt notice how bad they are. I have been working on them this weekend. Having trouble though getting the pivot pin bolts loose. It looks like they had the wrong size tilt cyl pin in one side, everything needs to be replaced. Thanks again for your reply Todd

Hello, I have a 2001 773G Turbo 2700 hours on it. When I put the bucket down in forward motion with even a slight resistance it wants to buck real bad. It will try to throw you out of the seat. In reverse with the bucket down its fine, just forward with resisitance . Ive had this bobcat for...

Hello Guys, Well I found out how to access service codes. I ran the machine and got it to fail again. The code Im getting is 32-50, (Tilt actuator short to ground). I found the actuator, of coarse its the bottom one. I could not see anything out of the ordinary, but its kinda buried in there. I...

Thanks alot guys, I will look for that. I would of never thought it could be something like that. Thanks again, Todd

Hello, I have a 2001 773 G turbo, aprox. 2600 hours on it. After about 45 min. of use the hydraulics for the bucket and lift arms stops working. I get 3 beeps and the ACS light goes on, the lift and tilt valve light goes off on left panel. If I shut the key off and restart, it will start working...