Recent content by sspdiesel

Just wanted to Tell The fix Put a new pump on eaton 187cc 11 tooth 2 bolt flange and work perfect took old pump apart , and found bad seal

Thanks But asking about the hydralic tank Suction Tube screen

Do All Machine Have a suction screen On The pickup if so what systoms would it cause

did you fix it .

Hydralic to-2 sae10w30 crain case 802 case is 7.9 gallons

My Mounting quick disconnect is missing one pin assembley any one have any luck with the after market plates that you weld on

It Has a pilot releif in the spool valve assembley that I replaced , The unit has one pump that feeds all . Also Change filter and fluid . All Hoses were burnt repaced the all .

Smoke . Steam , Pressure Pressure Is what You are looking for that is blowby , Keep in mind That If The machine hasn't been used there is alot of moisture in the crank case which some time cause the steam . One thing about these small diesel, They do Not start when it is cold with low...

Hello New to this Site and skid steers , I purchased a daewoo skid steer 1760 with a perkins 700 , That went on fire and I rebuilt the machine The fire dept put it out by installing water in everything . So Here is My issue That I left , I ran The Machine for seven Hours Plowing with a box blade...