Recent content by Simplelife

All the switches are not illuminated, they are in off position . Still trying to figure it out.. Today I’m doing Maintence on it .. other then that this machine is a beast ..

There’s 2 large quick connects on top of the boom which is the high flow , and there’s 2 smaller quick connects which is the low flow on the inside of boom , I connect the grapple to the smaller ones .. and you can see the grapple just barely open .. is there a valve that happens to get stuck...

To turn on hi flow , first you have to turn detent on , left joystick press the left top button , it will start spinning mulcher , then by key switch there’s a green button you have to turn on , then that engages the hi flow .. But I still can’t figure out how to use the grapple .. like if...

I’ve seen that page before.. I took out my solenoids and cleaned them all. I put on the grapple again and now it opens the grapple maybe 1/4 up and down .. but no further.. but while doing this it also puts pressure on my hi flow line .. I guess I’m getting a little closer .. any ideas ?

This is the supertrak

I bought one back in January , pretty stout machine , sold my asv rc85 .. big upgrade .. but was hoping a member on here has experience with one.. as I went to connect my grapple and it seems when I use the pedal or joystick buttons it pressurize my hi flow line as well as the low flow where the...

Oh ok that’s easy enough , I also purchased a 13lb radiator cap , as the one on the machine was 7 pounds and the dealer said 13 is factory.. I mulched about for an hour and atleast no coolant dropped out of overflow , and my temp was at 212-220 fluctuating back and forth .. but only with the...

Just trying to see where to connect the hydraulic hoses on a cooler I bought .. I’m going to mount it on top of the cab, directions are really vague

Awesome , yeah fishing isn’t as good as it was even 15 years ago , but eh it’s ok.. I run a grapple truck here in Naples -ft Myers , and my asv is basically just a yard toy and side jobs

Awesome ! And I live in Naples , not to far from Everglades city , yeah my wife loved Tennessee when we went to Nashville and this past Christmas to gatlinburg , Naples is getting out of hand to be honest , but all well the money is here .. what part of Tennessee you live in. ?

I got some parts on order , I’m in south Florida and mulched for about 45 mins today and it wouldn’t go pass 195 , but it was 58 degrees out today .. I’m sure the thermostat in this is old , I should just buy one for good measure , the previous owner only graded with this machine . I still want...

Wondering if this problem was ever resolved. ?

My local hydraulic guy said anything below 240 is ok on hydraulic oil temp , but you don’t want water temp that high , but I think 200 -210 is ok , my buddy cat 299 does have a gauge to see the numbers but he said it runs a 1/4 above normal which I’m assuming 200 . Who knows but I just take it...

Oh this is true , I have to order one .. only place I can find it is trackloaderparts, my local asv dealer is lost for these rc models .. another issue I was having was with my diamond disc mulcher the water temp would hit 215-220 degreees in 30 mins , then I turn off the head and in like 1 min...

I’m not sure how it works , I believe it let’s charge go one way and not the other.