In case anyone else has this problem, it was the washers inside the drive gear on the nose of the pump. Here's how they go in. Washer with two flat side goes in first. Then the little spring looking washer goes in next. Who would have thought having the washers in wrong could cause so much...
I only need the pump body but I would be interested in a working pump if I could find it. Its on a Perkins 4-108. Part # is 3249f010. Other pump body's would work if it has the advance timing mechanism on the bottom.
I took the governor plate and throttle arm off the top of the pump. Then I took out the part where the injector lines go to change the o ring. That's as far as I went into the pump. I also changed the front seal. Looking down into the pump from the top, I set the governor arm behind the the...
I need some help here. I just resealed my injector pump. Put it back on the machine, bleed the system. Put the throttle lever in the start position and the engine revved to full throttle. I shut it off. Tried it again. Full throttle again. I pulled the throttle lever back and it idled down but...