Recent content by Pizat

Turns out both Jic 90s on the lift arms are leaking. I'm going to say if they leak on boom up they suck air on boom down? They have a nut on them obviously but I cant tell if they are threaded into the actual rams? This has turned into my own 743 master thread I guess.

Confirm glow plugs are getting power on the rear? It starts on the far back plug and is in series to the front.

Shes back together. Now I have some adjustments on the steering to take out some creep. I noticed some foam in the site glass and chatter when the boom went up and Down, keeping in mind I had all the hydraulic fluid out of it, I'm assuming this will work it's way out with use?

Shoot. Was going to ask opinions. I have to reinstall motor and hydro pump. Should I do motor first and slide pump onto universal or other way around? I've had the engine out before but never both so if one ways easier I'm all ears. Thoughts?

I replaced all the wear sleeves so that should help. I'm going to leave it and see if it leaks, the front are recessed so that worked out. I'll have to come up with something to drive the rear seals further if needed which may be a challenge. I'll blow that bridge up when it's in front of me...

End play is perfect with existing washers.

Good news is back end is now done. The blue seals are sticking out of the hub about a 1/16 of an inch and not flush. Should I be concerned? The tire side of the inner seal doesnt appear to be catching the wear sleeve, however, the chaincase side of that inner seal is definitely catching. Thoughts?

One down. That's for the advise!

Remove front panel on the chaincase and have a look what's going on. Busted chain? Stripped spline? Sproket came off?

That's brilliant. Thank you. Patience and persistence is all that's left. I'll go round 2.

Greetings. I think I've read ever 743 thread on here and am halfway through the infamous 743 chaincase rebuild. (Awesome info on here to get me this far!) Here's where I'm stuck. I can not seem to get the rear axles to insert into the sprokets. I really dont want to bust the chain apart and have...