Recent content by pigdoc

That sounds logical, I'll see what the repair shop says. Hopefully not too expensive.

The noise happens when I start the unit with the brakes engaged. I have to move the T-bar around to get the starter to fully engage to start the unit. After finally starting, the unit does not track straight in relation to the T-bar orientation. Thanks,

I apologize if this question is not appropriate for this forum, but: My 2005 Mustang 2054 has been a great machine for me for snow removal, but now I'm hearing some bad grinding noises from the T-bar area when starting. I'm taking it in for a check, but I might need to know how much it is worth...

When I tried out the Gehl3835, I looked at the oil in the dipstick. It was really dark and appeared to be needing a change. Shouldn't a dealer be expected to service machines they are re-selling, such as changing the oil? How much of a red flag is this? Thanks.

I drove a 2004 Gehl 3635 today with 2380 hrs, cab, heater. Since this was the first time I had been in one, it was interesting. Local JD dealer came down from $13.5k to $11k on it. All hydraulics seemed to work fine. I moved a little snow at the dealer without problem. When I tested it for...

I've seen these 'pull over' cab enclosures for about $350, and I'm guessing that having a dealer put in a glass cab with heater will be $1500 or so. How well do the cheaper ones work? Does the condensation from your breath frost over inside the cab? Thanks in advance.

Thanks for the two responses. After looking at lots of used ones, I agree that I might need to spend a bit more (hopefully keep it below $10k) and get something with fewer hours. I appreciate the advice on what to look at in a used machine. I'm in central Iowa and found several in Wisconsin that...

Sorry for a newbie question, but that is what I am: looking for a used skid steer to move snow at my small farm in Iowa. I'd like to spend