Recent content by OX1

The pics are hosted, here is the link. http://luxjo.supermotors.net/BOBCAT/MAIN%20HYDRAULIC%20VALVE%20SPOOL%20REBUILDS/ Still don't see any way to post up the pics though.

Thanks for help everyone. Got her all sealed up and back to like new..........errrrrrrrrrrr, well, back to not leaking anyway. Is there away to post pics. I took 40 or more pics of the entire procedure, would like to post up.

Great post. Have a question on the seals for the lift/tilt spool valves. I pulled out 3 black seals that have a small indentation, but was not "true" V seals. The 4th was orange and was a "V" type seal. Kit as black and orange seals...

I replaced both of those flex hoses while I was in there. They were rubbing agains't one another and I figured it was matter of time until the other went. One of them I could get to with wrenches and cheater bars. The other I could not even get 2 wrenches on it and instead of risking damaging a...

BTW. What is the trick to getting my paragraphs with some format so it does not appear I have one long runon sentence?

After further digging, it appears the shuttle valve and relief valve (in the motor) meter fluid back to the cooler so the motor does not overheat. I don't see how the shuttle valve in the motor could cause intermitant problems with drive in only one diection. See page 5 here...

OK, thanks. What do the shuttle valves do, redirect high pressure to either side of the motor to reverse flow (direction)?

Howdy First post. Been reading any thread I can find of intermittent drive on one side, one direction only. Reverse on left side is quirky. Sometimes it will not start driving until the stick is pulled back much farther than it should have to be, for initial drive, and then it jerks in hard...