Recent content by outofsight

Ok so I could not get full speed on the left drive so I changed out the bushings, swapped the rectangular brackets and then reset everything so I have zero creep. Now it runs full sped forward on both sides. My issue is that noe my left side reverse is easy slower than the right side. Not sure...

I should have added. Before I changed the steering bushings it would not run full speed on the left side. So I replaced the bushings and then turned the rectangular plates to the unused side. So now forwar is great! But reverse sucks. I struggled like crazy getting the dang Creep in neutral to...

My bobcat had really jumpy steering and was not able to go full speed on the left side. Replaced steering bushings swapped steering blocks to the unused side and rotated the steering cams to a new surface. Adjusted the Creep out if both sides. Runs awesome now going forward but left side reverse...

My bobcat had really jumpy steering and was not able to go full speed on the left side. Replaced steering bushings swapped steering blocks to the unused side and rotated the steering cams to a new surface. Adjusted the Creep out if both sides. Runs awesome now going forward but left side reverse...

Would you guys replace this drive sprocket or run it with the one broke tooth? Thought about doing a tack weld but I'm not sure if they are hardend steel. I have a new one but I didn't realize it's pressed in and I'd prob have to get new bearings etc and take it some place to get pressed off...

Called Snyder' s he has all the parts I need!!! Thank you for the lead

I found one place that was 10% less that bobcat but almost one month wait time on delivery. Wish I had known to check my main motor for hyd oil leaking into the drive before i had it all apart...live and learn.

Thank you that's what I was looking for.

I'll check out the sprockets,need to get the tires removed and see what I have for play. If I replace the drive chain I looked at bobcat and I believe they are a continuous chain with no master link. They are pricey so I looked up 80h chain and can purchase it for half price. Is this a bad idea...

I'll do that. Do you think I could weld up a new tooth on the drive sprocket? It's 1250.00 just for the sprocket. When I added the brake disks and brake guides and the 4 drive chains through bobcat it was 2450.00. Almost choked when I saw the dollar amount. Trying to find another supplier but no...

Just bought a fixer upper to move square bales and clean my horse pens. I'd never really worked on bobcat before and wow those mechanics earn their money. I hope to help out others on this forum and learn as I go. So far so good. My current project is a 763. Been an interesting challenge so far.

Working on a 763 that had a broken front left drive chain. When it broke it broke a tooth off the primary drive sprocket. So I need to remove the drive motor and the assembly that the drive sprocket is mounted to. Any tips would help me greatly. I'm also going to replace all 4 chains since I'm...