Recent content by Onyxfarms

I do have the service manual, and I ohm'ed out every wire and check all grounds and even the in-line diodes. All checked good. It worked a while back and nothing has been unplugged. I also looked for rubbing or worn wires. No bare spots found. It is the lights and the switch not working, when...

So I have a 1991?? 753 with BOSS control, that I have had for 15+yrs. The Aux Hydraulics are not working like they should. The Aux Hydraulic Button and lights do not work and change form key start to key start. Sometimes I have no lights, sometimes one, and sometimes two, but one thing is always...

Yes it works

Yes, the grapple would open and close. But it didn't seem to have the gripping strength, and that may have been a factor of the leaking hoses that I just fixed. I have the service manual and wiring diagrams, so I'm hoping it is a short somewhere and not the module on the frame.. PWC???? can't...

My Aux Hydraulic light is staying on and the button does not change anything. I have not hooked up my grapple yet but it did work the last time I used it. I am currently just using some forks.. I think this is an electrical issue. I will start trouble shooting now that I have stopped the...

I finally found the info in my service manual that gave me the answer. I will attach pics of what it said. I will disconnect the solenoid at the diverted valve, so it will not affect the front Auxiliary system if I push the wrong button. I have caped all the lines to and from pump and...