Recent content by Octaneforce

Is it possible to program the computer to “disregard” this code?

I performed a joystick calibration and was able to get the machine to move. Its now throwing a code d7598 which is a swashplate code. Im scared to keep running this and end up stuck in a bad spot. Debating going right into the trailer with it.

So i lifted the cab and the plugs that lead ton the left joystick were all underneath like an inch of built up grime. I dug them out and wiped them off but they dont seem so bad. Its alot of plugs. Definitely no broken wires. Should i start disconnecting them and inspecting the contacts?

2011 t190. Suddenly the machine stopped moving and shut down. I started it back up and it runs fine, the bucket/tilt works fine, but it doesnt move at all. The left joystick for the tracks has no affect. However the buttons on the joystick work because i can see it changing speeds on the screen...

thanks for the input! I did the alternator where it sat in the pond. After that it gave me proper voltage and the controls responded somewhat, but it was still not enough to move it. I had a towing company winch it out with a monster tow truck and once it was on dry land it fired up and operated...

I dunked my 2011 t190 into a pretty deep puddle. It was alot deeper than i realized and by the time i was attempting to get myself back out, it quit on me. The puddle is about 2 feet deep (more like a pond). We put a trash pump in there and got it down to about 8 inches. The water was enough to...

Just picked up a 2011 t190. The thing is a total beast and works great (ive used it for a day). However, the tracks are very noisy. Its a metallic chattering noise that matches the frequency of the speed of the tracks. Sounds like a metal tracked machine traveling on concrete. The right side is...