Recent content by mrWhipper

I've got no power to the ignition switch so it does not start or put power to the boss/glow plugs. It does work with a jumper/ inline fuses to the switch—boss/glow/starts as it should. The fuses look good. Thus, I believe it is a broken wire or relay is shot. I am unsure which relay is the...

I have a 773F. It is throwing a code HF 1-6 on BOSS. (Manual says this code means the hydro-static charge filter sensor has no signal). The BICS is flashing 3 times on the valve light. The lift and tilt do not work. Would the charge filter sensor cause the lift/tilt not to work? If not...

I have a 773F. It is throwing a code HF 1-6 on BOSS. (Manual says this code means the hydrostatic charge filter sensor has no signal). The bics is flashing 3 times on the valve light. I have replaced the valve stem and the magnetic coil solenoid. I also tested all wires to make sure I had...

Bobcat 773f is giving me a bics issue. It blinks 3 times on the valve light. All other lights working. This valve light leaves the boom/bucket hydraulics inoperable. I already replaced the solenoid. I am told on research that this light means there is a ground or break in the dark green wire. If...