Recent content by llcarter1995

I think that’s a good possibility, only three of the lights are lit up. The one that is not lit up is the traction control light, could that one be the brake? I didn’t realize the brake was connected to any electrical sensors? Also, if I want to just remove the brake all together, do I need to...

So everything starts fine. To get the arms to work I just have to press the safety switch and they will operate as intended. But when I go to drive, it stalls out. To get it to drive, I have to press the safety switch again, basically to lock the arms, and then leave the lap bar up, and it will...

I will sure trace back all wiring to make sure, I did check all the fuses and all appear to be in good shape and still in tact.

I feel like it could be more electrical, because when I can get each thing working, such as lift or tilt or drive, it works correctly as intended. I.e. up is up, down is down, left and right work correct etc. just doesn’t allow me to operate the arms and drive at the same time. I have to fiddle...

Yes, fluid level has not changed since he fixed the leaks and has not leaked since. So he fixed the leaks, but might’ve crossed some lines somewhere.

Yeah hydraulic level is good, hasn’t leaked since he fixed all the hoses but it sure seems like hoses got hooked back up incorrectly or wiring was hooked back up incorrectly. The I should note that the safety switch has an audible click still, so it appears to be working, but does not disengage...

So my 2000 bobcat 763 is having some issues. There is a certain sequence I have to do to get it to either lift and tilt, OR drive. But I cannot do both at the same time. Also, the lap bar has to be up before it can move. It’s like everything is backwards to how it should be. I just had a...