Recent content by Lechbuild

I ended up taking the machine in. Turns out the computer board was bad. The skid steer works great again. Only problem was the they let me demo a L220 till mine was fixed, know I would like a new one.

Ok, thanks for the reply's, here's the thing, I replaced the interlock relay today with no change. I do have power to the white/ orange wire with the key in the on position and I do have power to the white/ light green wire in the start position. The machine also starts every time, but shuts off...

Correction, the white/ light green wire does have power when turned to start. The white/ orange wire also has power when the key is in the on position. I am wondering if its a silenoide somewhere.

First of all I would like to thank everyone for their reply's to my post. I checked the electrical and the white/ green wire does not have power (on the interlock relay) when the key is in the start position. I do however have power on white/ orange with the key in the on position. Is there any...

Hello, I am new to this site, I did a fair amount of research prior to posting. My problem is starting the skid steer, it will start fine but will shut off in a few seconds. I am also reading error code 2. Just like most of the other posts when switched from run to service the skid steer will...