Recent content by Johhei

My LX 565 display lights (seatbelt and park) will not shut off when I shut down. I have to remove the neg battery cable to save the battery. Possibly the ingnition switch??

The bucket tilt cylinder has a small leak on the top side. The hydraulic hose is brand new. I would like to remove the hose and apply some Teflon tape to the threads. With the engine NOT running, can I simply remove the hose. Will the hydraulic hose be under pressure?

My brake does work! My problem is the thumb release button. To get the brake to release, I need a screwdriver to push the button further into the handle.

When I’m running my machine, the accelerator lever keeps drifting back to a slower speed. It never used to do this. What can be done?

Anyone know where I can find used parts for my LX565? Specifically looking for light housings for now but it would be nice to have for any other parts.

I know my LX565 has the self leveling feature but I can’t remember how it works. Lost my manual!!

Thank you very much. I will follow your advice! The hydraulic fluid was very low, about an inch from the bottom of the reservoir (with the bucket an boom extended) After 2 gallons of oil and the boom and bucket retracted the level is about 1/2” above the max fill line.

Thank you! I have a new problem. I filled the oil in the hydraulic system. It starts fine but shuts down after approximately 30 sec. The display says F-04. Any ideas?