Jimsteinbrenner's latest activity
Help Support SkidSteer Forum:
-
JJimsteinbrenner replied to the thread Replacing axle seal on 610 Bobcat .I have a leak starting on my left rear as well . Parts number would be helpful. Sounds like it would be best to have the speedy sleeve...
-
JJimsteinbrenner reacted to Mira9232's post in the thread Replacing axle seal on 610 Bobcat with
Like.
I know this is a long shot but if you are still around do you know the part number for that sleeve? -
JJimsteinbrenner reacted to mrbb's post in the thread Welding on bucket while attached to my bobcat with Like.
MY 2 cents and no expert by any means but I know a few guys that have welded on there machines, and all they did was disconnect the...
-
JJimsteinbrenner reacted to fortworth-cowboy's post in the thread T595 bucket won't lift load - low pressure? with Like.
OK, either your Main relief valve is damaged or your gear pump is gone. For both you would need a Flow Meter to Test. Every Hydraulic...
-
JOn my 742B I put the rear wheels up on blocks, filled a garden sprayer with diesel{kerosene works good too} and hosed all the internal...
-
JI've used a shop vac and just reduced things to a small hose, worked pretty good or what it is you can also flush things some with...
-
JPut the machine on blocks, remove the wheels, put a wrench on the axle bolt and allow the wrench to jam against the housing, use a long...
-
JOK< My 2 cents here, when you say you get stuck, are you getting stuck due to tires packing and then loosing traction, or are you...