Recent content by jesnic

I have talked to a couple New Holland Mechanics that have told me either the bolts were not torqued to spec, moved a little creating the issue, or the bolts were over torqued and stressed, creating the problem. Had one mechanic tell me the bolts were designed as a fuse in the system. At this...

I finally got the machine up and running and the hydraulics working. After replacing the EIC board, the run/service mode switch, the ignition switch, the seat safety switches, the seat belt, the start interlock relay, the start relay, the alternator, battery, fluids, air intake assembly, oil...

I have the machine running after it sat for many years. It will start and run in service mode. In run mode, the seat belt light and park brake light stay flashing

Thanks for the info! I drained the oil in the engine today and about 2 gallons of water came out before the oil started flowing. I removed the starter and got it freed up. Reinstalled the starter, filled with oil and used the starter to spin the motor over a few times until oil came out the...

I am new on this site. I have acquired a NH LX865. It was swamped when a river overflowed it's banks about 5 years ago, I know the water was over the top of the machine for at least a day before the water drained back into the banks. The machine has not been started or fooled with since then. I...