Recent content by Jenstibs

Hi, The EGR value has been disconnected with little improvement Test perform Check timing fuel pump, valve clearance, return line, bypass furl line, changes electrical fuel pump, injected pump tested, boost pressure 11PSI, compression test, hyd filter ok, pilot pressure ok, drive motor relief...

Here is some of the details and testing preformed The machine was accidentally over filled with oil and had to have the head gasket replace. Got it back and had a overheating issue. The head gasket needing replacing again and the head machine. When we got the machine back it has lack on power in...

Hi The EGR Value has been bypass and made little improvement. Still have same issue ;-(

Hi, I have a Takeuchi 230LT Series 2 track machine with only 1000 hours. The machine was accidentally over filled with oil and had to have the head gasket replace. When we received it back it had a overheating issue. The head gasket needing replacing again and the head machine. When we got the...

Good Morning Bobcat Dan, The motor is a Kobota. Thanks for your reply and assistance. Jen

Hi, We purchase a Takeuchi a year a ago and the dip stick broke off in the sump and the machine was over fill in oil which is why we had to replace the head gasket and get the head machine. Now our problem is that it does have power when under load (pushing) The air filters have been change, The...