Recent content by jeep1

When it's fluttering is it blowing black smoke out of the exhaust. The choke might not be opening all the way or the float in the carb is sticking. Gently tap on the carb, see if it helps.

My 632 was doing the same. Turned out the seal on one of the drive motors had blown out, allowing the oil into the chain case. After replacing the seal twice I took the motor to a hydraulic shop and was told it was to wore out to rebuild. After 3 months of looking for another motor, found a...

Found a couple rebuilt motors. Stoens Hydrostatic Service in Glenwood MN. is a good size shop,very helpful and friendly. Would recommend for hydraulic motor or pump issues. Thank you guys for all your input!

I put a 62 inch grapple on my 632 last spring. Believe it or not, got it off of Walmart.com. Quality is very good, seems to be well built, and the price was right.

Yup! Did the one but keeps blowing the seal out. Glued the last one in, then it blew the rubber right out of the seal. Took to hydraulic shop, they said they are just to wore out to rebuild.

I don't think the drive motors would go out just like that. I'm no bobcat expert, but sounds like low on oil or the pump went out. My motors were working okay they are so wore out that they were leaking internally and pushing the seals out around the shaft. If it was mine, I would check your oil...

What are you looking for? In my search for motors, I'll watch for you.

Is that salvage yard you're going to visit, good size? I'm going to have to do some research on what models used the same motors. The Model 632 motors are serial number specific. They put 3 different motors in them. I would like to find 2 motors out of the same machine, that way the wear would...

I know what you mean. No I don't

Let me know what you find. Thanks

I would appreciate that. Where are you located? I'm in eastern South Dakota.

Trying to find 2 Ross-Mae drive motors for a 632 Bobcat skid steer. The machine and motor are in good shape, has like new tires but the motors are wore out. Any help would be appreciated.