Recent content by jdubya

I have a Case 1835C Uniloader with the TMD-20 3cyl Diesel engine. My socket is too thick to fit down around the injector. Is there a special thin wall socket to pull injectors? Thanks, Jdubya

Okay Hotrod1830 thanks for that advice. I will check the GPlugs out next. The rebuild will be out of my expertise so..... I would have to find someone to do that. Not sure I want to put that kind of money into this machine. Probably not worth but $5-6K when running. A leakdown ?

Hello, I installed the new electric fuel pump and it pumps really well. Getting plenty of fuel to the injectors now. BUT still won't hit or start up. I had the starter rebuilt so it would turn faster and I bought a new heavy duty battery Group 31. But still won't fire up. It is smoking out...

When I parked it, It would run and then cut off, then you could crank it back and it would run for a few mins. and cut off. I found out the oil pressure was low making it do that so I filled it will oil. The oil pressure light does go out now when you spin the starter. It does not have any kind...

Good Morning, I changed the fuel filter on my 1980 model 1835c, 3-cylinder Case diesel engine uniloader and now it won't start. I bled each injector by running the starter until fuel came out each one of them. I filled the fuel filter with fuel before I installed it but a lot of fuel drained out...

Thanks for your input Tazza.

Thanks Gearclash, Maybe I need to be finding a diesel mechanic. I definitely don't want to damage a good engine. I never thought that a diesel with all the oily film inside would corrode or lock up. What would you do when the head is off? Saturate it with fluid? Thanks again, jdubya

Thanks for your input Tazza. Yeah... I plan on trying to free it up and see if it will run before we go tearing it down. Yeah another person said he used ATF too to free it up. I am no mechanic so I will have find a good diesel mechanic to do serious stuff like that. I had an old Farmall tractor...

Thanks Jerry! Sounds like good advice. I hadn't thought about pulling glow plugs or injectors out. I guess I would need to pour about a 1/2 pint of fluid in each hole so it will saturate and go all around the piston.

I have a Case 1835C Uniloader Skidsteer with the 3 cylinder Continental diesel and the engine is stuck after sitting up for 2 years. Does anyone have any tips on how to get it to turn over? The fully charged battery won't turn it. Is there a way to turn it mechanically to break it free? Any help...

Thanks in advance for any help. I have a 1986 Case 1835C with the Continental diesel engine. Does anyone have a photo or drawing of the base that the rectangular fuel filter mounts to? I am trying to see if there are 3 tubes protruding out that the filter slides up on. My base only has 1 tube at...