Recent content by imfixinmopars

you will have to forgive my ignorance on these,im new to the skid steer repairing,the leak looks like its right behind the driven pulley on the LH side.it seeps down the cradle mount,and towards the engine.im sure there is naother leak on the other side,but i cant seee where.how many hours is...

i removed the panel and see thats its the pump,driven thats leaking,whats the repair situation on this,NOT THE CRANK SEAL,SORRY

i have noticed that the LH crank seal is seeping,and was wondering how much of a job is it to replace? its the side w/ the large belt drive,and i was wondering about releasing the tensioner on the belt,and removing the pulley,whats in volved? thanks!!

hello, i have a 00 bobcat 863,thats in need of a set of loader arms. all i need is the arm assy.if you have such an animal,call me at 517.617.4135 or email me at [email protected] .if you have a salvage machine i might be interested in it also,if it has arms,thanks,mike

well, i thought about the valve-ing,and figured the top spool is the aux,and took the rear cap off of the spool,and WAAA-LAAA! the short,thick spring is broken! thankfully i have the 00 863 in the shop also,and i stole the spring out of it,and it worked,well at least it loads the engine,when...

you guys will have to understand,im not an hydro expert,lol. does the solinoids direct fluid to the aux spool,and move it to control the aux fluid to the line out front? i just dont know which spool is the aux to ck the springs.i like that idea,..spring damaged?,i have changed the coils and...

looking for a set of loader arms for my 863 bobcat serial 514440204, a 2000 i think,thanks,please email me at [email protected] or call 517.617.4135 thanks,mike

i have a '02? 863 bobcat,and the serial number is a 514451298.only one of the aux lines deliver oil psi to the connections on front of the arm,for post hole digger ect. i have cked the voltage at the unworking circuit,to the solinoid and its 9.68 volts under load,i also switched the coil from...