Recent content by Hawkerpilot05

I would add instead of steel wool, use copper mesh. You can order it from any pest control company. Copper mesh supposedly to a mouse is like a human biting on aluminum foil. Also, it doesn't rust and stain like steel wool. It works good.

I use chains on our LS 190B with a blower. Work great. I would recommend the 2 link chains versus the 4 link. The 2 link has the chain cross the tire after every 2 links versus 4. The 4 link chain tends to get the chain that crosses over to wedge between to tire knobs.

Assuming it is similar to my LS190B. You have a switch for high flow or normal flow up by the instrument panel that is labeled high flow. You also have a 2nd set of hydraulic attachment fittings that are different in size for a total of 4. I was told that it is very expensive and labor intensive...

I bought a used 2005 LS190B with high flow hydraulics with 1500 hours last December. This summer I noticed that it runs for sometime after I shut it off at low throttle. If I shut it off at 3/4 or greater power, it shuts right off. Also, when engine is cold and started, it seems to have blue...

I want to thank those that posted about this. I have a 2005 LS 190B with enclosed cab that we recently purchased. I share it with my brother. Unfortunately you can not open the door with the skeleton grapple half raised. So my brother was cheating with door open and brought the grapple down and...