Recent content by free skakel

ive been wanting to buils a pipe puller for the quick tach on my tb135 excavator, something simple just a nice blade maybe with a chineese finger cuff to hold 1" irrigation pipe , any body build one? i live in a sandier area and i thing that by manipulating the hydrualic levers i could get some...

i realize this is an old post but it just happened to me and another friends, after spending hours ripping the machine apart and figuring out it wasnt the $80 proximity sensor , these wiring harnesses are double fed to save space, hence all the diodes, in front of your feet theres a box with...

i know this thread is old and im a newb here, but was lurking this thread, most bobcat excavators and major ones will sell you a longer pin , i had a 331 and there was 2 pin lengths, on my current machine tb135 i just re-betterbuilt a TAG thumb, i rebuilt mine using factory bushings , i replaced...

thanks for replying, i havnt been to look at the chipper yet but its a smaller one, i will be running it on a takeuchi tl140 w/ 2988 operating psi and 19.8 gpm flow, would the hyd motor i need be availible at say northern hydraulics? and would i have to get one with a case drain? i am totaly new...

been tinkering around with the idea of turning an old chipper with a bad engine into a skid steer chipper im pretty sure need to mount a hydrailic pump directly to the clutch disk? as most are belt driven then mount my quick connects to that also i have a high flow tl140 and what does the third...