foton's latest activity

depending on how small you need there is the stand on machines , as the toro dingo style

I would look at the battery connections first, make sure the grounds are good ,often they get overlooked. and if you have a battery...

it might be a good clue as to the condition of the engine to drain the engine oil to see if there is water in it. If there is pulling...

pull off a sample of fuel and smell it diesel and gas do not smell like each other , and I guess do it in a glass jar and let it sit for...

at this point you are just a ng please do not prove that you are a fng! hahahahaaa

A friend of mine has his s185 at Bobcat for some chaincase work and they are using a 68 weight hydro oil in the case. (we are in South...

you are wondering right if the oil and water seperated and then the water freezed up and broke something or pushed out a seal causing...

first I do not own them,this is just what I have read. They ride hard, they do have some interesting tread patterns ,they do lower your...

you are correct over 75 is def ,that is why there is so many equipment manf.s that have a 74 hp machines.

so do you have electrical hook ups on the rock bucket? If so I would unplug it and go to the battery switch in the back turn the battery...

well never mind, getting old sucks

I think I would use bolt on 3/8 inch rings on the floor and a blacking plate as large as will fit in that space near the corners of the...

I assumed that when you wrote it had a contentinal engine it was a gas burner, wrong! 15/40 diesel oil would be best for a engine .

I would think, no it wont be a issue.

you never know maybe all you have is a stuck ring ,on disassembly you will know if you are luckyish or not.