Recent content by fedwards

skidroe Thanks for the info, I have ordered this pump from LPS and should get it Momday or Tuesday. In the mean time I am rebuilding all my cylinders. Thanks again for your help

it is a gear pump

I have a 743B ser#1823? I need the hydraulic or aux pump. Mine works but is weak

Dont know where it came from, I have never had this unit apart, thinking it is from prev. owner. I have changed and added oil to the system, but always thru a screened funel. But again thanks to all who helped me thru this.

OK problem solved!! I machined a piece of flat stock to fit in the splines of the gearcase, with this now locked I tryed to spin the wheels and could not, so gearcase is good. I installed motor, and pump. While putting the unit all back together, I pulled all lines and hose. I had flushed fluid...

all lines were flushed. I have the the covers off and again the chain and sprockets look good. flushed and cleaned the tank. I have no play in the bearings from inside the tank, the ones with the double sprockets comeing out of the gearcase. Before I pull this , is there a way to test the...

Jerry When I got the motor back from the shop I installed and put the unit up on stands to adjust the nuetral position.Both sides ran in forword and reverse while I made my adjustments. Thinking my problem is fixed I dropped the unit on the ground and found that the right side has no drive, you...

The aux pump on the test stand would only reach 650lb. would'nt this effect the drives on both side's, not just one side. the only side effected is the right hand side ,if you were sitting in the seat, this is the drive that the aux. pump bolts to.

OK just got pump back from the shop, both drive pumps are good, put unit on test stand and they test out good. The aux. pump is weak and I will replace later, this has nothing to do with the drive. All that is left to check is the gearbox, right. If so I will pull it, but I do not hear any gear...

I got the motor back and installed, drive gears,bearings, chain all look good. still have the same problem. swaped motors from side to side, problem remains on right side. removed and replaced replenishing valves, still no drive on right side. where do I go from here ?

ok mech. called today and said he could not find anything wrong with the motor. he said everything looked real good,he is putting it back together with a new seal kit and that my problem is elsewhere ?

is this correct

Ok I pulled the right side mptor and sent it to be rebuilt, was told it would be 2 weeks. If i'm reading you right, you are saying cap the hose's to the right motor and start the engine, applying forword or reverse to the right stick the hydraulics should scream and this would be good ?. Would...

I have had this unit for 16 years with no problems, I have done the general maintenance to keep the machine nice. The problem started last year when you tried to make a right turn, the unit would jerk, not turn smooth. This month we had a bad storm and when I tried to move some small tree's from...