Recent content by Easthill

excellent, thanks again for your help.

Thanks Bcat. I did the same thing last nite when reinstalling and it worked perfect. I am back up and running well. Now i just need to get the 5 gal of hydro fluid out of the lower pan. Is there a drain i can open ?

Ok i got it- needed a second set of hands to colaspe the main hydros just like you said. Also i had never raised the lift arms before i started making the job 3 times more difficult than it needed to be. Luckily I had a neighbor let me borrow his tractor to make it happen. Should I cover the...

Hello all. I am new to the forum and i'm replacing the spool seals on 2003 T200. i couldnt slide the spool shaft out the back side of the pump as it is hitting the 2 main drive hydro lines. i removed the lines from the inside but they are just a tick to rigid to move out of the way to clear the...

Oh, ok. Thanks.

Thanks for the reply Taz. I can manipulate the closest hose so the spool will clear but i would need another set of hands to hold the second hose down . its very tight and Im not even sure if its possible. I was hoping someone familiar with this model could chime in.

Hello all. I am new to the forum and also replacing the spool seals on 2003 T200. i couldnt slide the spool shaft out the back side of the pump as it is hitting the 2 main drive hydro lines. i removed the lines from the inside but they are just a tick to rigid to move out of the way to clear the...