Recent content by dynarider

it does change engine tone espically at idle, just like when opperating bucket curl at the max range of movement so now i need to find a pedal or fab one, thanks

Thanks will try that. The linkage is hooked to a valve.

My Mustang 332 has the lines with quick couplers under right boom, it does not have the 3rd foot pedal but the provision for one is there, I can rock/move the provision and it moves pivots and linkage on left side of machine, and feels to be spring loaded with a return to cent action. with out...

thanks for the help I went with a multi viscosity AW 32/46/68 oil so far no leaks.... haven't used it much, but I like the old thing

I seem to have all the leaks down to a very minimum, lift seals and hoses, filters and fluid changed, just did the axle seals and cleaned out the case want new fluid to go back with, old fluid was red in color and thicker feel than atf. my hydraulic was clear in color but appreciate the help...

thanks

What type of oil/fluid for the chain box on a mustang 332. All help appeaciated

does anyone hve part numbers for axle seals on a 332 mustang

thanks , it all comes down to where you stand to look at the rotation

questions on a repower, in a mustang 332 has 2 cyl Onan NHC flywheel marking show clockwise rotation, and all twin cylinder engines I looked at online show rotation counter clock wise? Honda, Briggs, Preditor... would pump have to be changed for rotation?, a gear box added of some sort? I...

This is what I came up with and when I use it I pull 2 outer blade bolts and put them back in to hold pipe on works ok on concrete, but won't Peel off packed snow with pipe on. Looking into coming up a quick pin or a slotted latch to make it toolless removal

yes i can get some this weekend or like stated plenty on you tube that use pvc, i think steel will last longer, I used mine on concrete with good results