Recent content by dunringil

Help Support SkidSteer Forum:

  1. D

    Have you ever turned your bobcat over

    I had a situation just the other day. I was filling a ditch that was at the bottom of a hill. So I am travelling down hill with a bucket of dirt. If pull up to the edge of the ditch with a bucket of dirt, it tips over due to the grade. Even with the bucket only 6 inches off the ground. So I had...
  2. D

    Running bad again.

    Found it. It was the condenser. First thing I tried. Coil was next. but the condenser fixed it right up.
  3. D

    Running bad again.

    Well, I thought I had my issues squared away. No such luck. I took it out to clear off some bursh, ran it for about an hour, then it started to cut out. It will run for 30 seconds or more, then cut off then it might fire back up on it's own or it might cut off. When it fires back up, it tends to...
  4. D

    610 progress at last

    I have put new manifold gaskets and rebuilt the carb and put in a new air filter plug wires plugs and points. Added nearly 3 gallons of hydraulic fluid. Spent maybe $60 total. Thankyou ebay for parts. Run's much better. It's actually strong enough to lift a full load of dirt. It's also easier to...
  5. D

    M610 speed

    The entire pulley assembly comes off of the shaft. The large pulley that mounts on the tapered shaft of the engine.
  6. D

    M610 speed

    I have a 1979 610 bobcat. The fellow that use to own it, told me to never use the lever for high speed. I took his advice, never really thought much about it. At that time the thing just barely ran good enough to pull itself around the yard, So I never really investigated it. Recently I rebuilt...
Top