Recent content by DslDan

Ok by looking at removing the large cooling fan looks straight forward, but will it fit out through the big hole above it??? Anything special I need to know or look for before R&R ing??

Ok I'm about to do my spring oil change on the 753H and was wondering if straight SAE 30 can be used in place of the 10w-30 in the engine. thanks in advance Dan

thanks for the advise I'll try and get it in the shop this afternoon and check with a meter. It sure looks like a real PITA to get the alt. out of this thing. Any tricks?

I'll check voltage tommorow. the volts guage was alittle high. what would cause it to over charge?

Ok had my 753h out today and it locked up like the arm rest ws up or brake was on and all the lights on the BICS were flashing.....I can shut it off and restart and get a few feet with it very slowly. Is there a way to bypass all this or is the BICS screwed or something bigger?? thanks for any...

Ken, thank you for the response.....I've been waiting for a manual to be sent to me for the past 3 weeks. I will take a look at it tommorow. Is it kinda self explanitory? I'm above averge when it comes to mechanical ability. Is it where the control levers meet the hydrostat in the back of the...

Ok seems I've developed a creeping drive on the right side of my 753H its also slower on that side too. is this bad news or something simple? thanks for any help

Here is an older 743 for ya not too sure where you are located though http://boston.craigslist.org/gbs/for/226097426.html

not too sure about your filter but as far as letting it sit just go to your local wally world and get some Powerservice diesel treatment in the white bottle (its got the anti-gel) plus other fuel conditioners. Should be all you need

All I'll say about that is OOOOOOHHH YEAHHH

Tazz, Hay I'm not too sure what machine you have but I've got a set of the brackets for a backhoe that have the balls on them that you could make me an offer on plus shipping. I'll never use then and they are even in good shape. For the right price I'll even have them sponge blasted and...

Rob Glad to hear you got it figured out. You didnt hurt anything having it hooked up backwards. Now just sit back and wait for it to snow and sit in your nice warm cab and watch all the grubs freeze their rears off shoveling by hand Dan

Two things I would check 1. Have you tried reversing the hoses on the heater itself? I know some heaters have a check valve built in and if its hooked up backwards what you are describing will happen. 2. You could have an air bubble in the cooling system preventing coolant from making the loop...

Two things I would check 1. Have you tried reversing the hoses on the heater itself? I know some heaters have a check valve built in and if its hooked up backwards what you are describing will happen. 2. You could have an air bubble in the cooling system preventing coolant from making the loop...

Yeah I know about the attatchment bug I was lookin at a pretty nice snowblower today that could sure make life alot easier and alot more $$$