Recent content by dschoolman

I found a skid steer junk yard about 40 miles away. They have a 742 with a blown engine and Hydro pump. I got all the hoses and pipes I could off of it, a new looking lap bar, and a few other items for $200 US. He has parts all over the place in his building. It looks like about 10 loaders...

The meter says 8,000, but Tazz said that by the pictures I took, http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=68178#68315, the previous owner probably just left the key on.

No, but I had them looked at. I was told they were fine.

I refurbished the whole pump. Getting ready to put the engine back in.

The shaft to adapter (spline) is not in this list??

Can someone tell me what the torque is supposed to be on this?

I would definitely check the pickup. Before I tore down my 743 for rebuild, I had a heck of a time getting it started. Sometimes it would start and seemed to run fine. Then nothing. I followed it back to the pickup. It was all gunked up.

Do you still have 743 parts for sale.

Harry There are two things for me. When I had it running, I had a lot of issues with it hopping, even on gravel. I have past experience in on a skidsteer- construction for 5 years running one. 2.5 inces of slack can be the cause of this a little. When I put it up on jack stands, there was a lot...

rollerchain4less.com #80H X 10FT Heavy Series Roller Chain (Heavy Duty) for $56.55

Two 5 gallon buckets of crud and two hours of power washing. It had hydro leaks everywhere. Hydro controller leaked. Power shaft on pump leaked (it was bent from the engine and pump coming loose from each other before I got it.) There was an inch and a half of crud on the oil cooler. I gave it...