Recent content by DonFruits

The book says to set engine at 29 * btdc , set pump at 340*,

I have run across some foam pill tires with a bastard, hole, pattern and circle. I have been taking mine to the machine shop, cutting out the old centers which are extra heavy duty and putting new centers cut on a flame table and weld them back in with a three-quarter inch overlap on each side...

Mine says leave pump locked! Poor design with no key way in gear !!!!

The main trouble I keep having is the tapered shaft on the injector pump wants to let the pump slip from torqueing down the gear, I am no way a diesel mechanic, but this is a poor design with a taper chapter no keyway in the gear. Has anybody dealt with this before and I have any good...

How do you keep the pump from spinning on a tapered shaft? We are installing a Lucus 1262 injector pump on a new Holland skid steer. There’s no key way and the gear.

What about steel tracks on foam filled skid steer tires 76% tread

What about steel tracks on foam filled tires, 75% tread ?