Recent content by Dimambro22

It is a ford but got it started tonight....I thought screw it turned up the compressor and blew back into the tank the reconnected the hoses and pressurized the tank again. Got out the starting fluid, two quick squirts cranked it, then another two and she started. Thanks for the help

If I pressurize the fuel tank how much fuel should come out I put about 20 psi and just a little stream is all I get. I sealed the cap opening real good with a plastic bag and some rags. Could the return be plugged and stoping the flow also? Thanks Chris

I tried that, how much pressure can I put through that hose? Is there a filter in the tank? That is originally how I cleared up enough for it to dribble out. Thanks Chris

Ok I have a l785 everything was running fine I till 2 weeks ago I ran the machine all day on a Saturday and put it up for a week. As of last week I got to start it runs for 30 seconds then quits and won't start back up. I have check everything fuel, priming the injector pump, changing the...

Well think I found the problem added about 4 gallons of fluid and low and behold the left pump t Where it connects to the drive shaft from the motor is pissing it out like you wouldn't believe. Is there a seal back there or should I just repair the whole thing? Thanks

Just the left side will not move well a 1/4 rotation each way. The right side works just fine. I checked the fluid it a little low so I am going to top it off and see what happens. Thanks

I have recently acquired a nh l785 ford diesel skid steer. Everything works except the left hand drive. The drive motor turns 1/4 of the way. Is there a releif valve or something that is stopping the flow or what? Is the motor just shot and need to be replaced? Please help thanks