Recent content by DAWGFAN

i undone the hydraulic lines on the bucket yesterday while i had the grapples up and just my luck they are still up in the air this morning, so at least i know its in the loader now. the only reason i was using the trigger was to grab something and hang on to it without having to use my thumb...

i have a hard time explaining things, but i only have a broblem with the lift and tilt if there is pressure on the grapples either up or down i can clamp over a log and pick it up fine when i just close the grapples but if grab the log with the grapple teeth to move it, it will slip out if i...

i ended up posting this twice in the skid steer forum and here, ive been talking with tazza on it however this is my question when the grapple is up should there be enough pressure on the lines to hold it in position. once the right grapple leaks down half way i can push the left grapple down by...

sorry i have a hard time explaining things, but yes if i have steady pressure on the grapple this is when the lift or the bucket will not work properley. problem is that if i grab something (say a small stump to pull out of a brush pile and the grapple doesent shut all the way) i will end up...

ok guys got home today checked the aux again i even swaped the fittings same thing happens the right hand grapple goes down i got out of the cab and i can push both grapples down i push on one and the other will raise up. if i push the aux button to make both green lights come on and hit the...

I WOULD SAY THAT WOULD BE TRUE THE CASE TO BUT MY BROTHER INLAW USES THIS SAME GRAPLE ON HIS 873 AND THE CYLINDERS STAY UP IM CURIOUS IF IT HAS SOMETHING TO DO WITH THE PUMP BECAUSE IT IS THE CYLINDER THATS FURTHEST AWAY THANKS FOR THE REPLY

sorry guys i posted this first in the wrong place i just bought a 753 f good machine however i am running a 72 inch bobcat grapple on it when i raise the grapples up the right one will leak back down rather quickly the left one stays up also when the grapples are shut i dont seem the have enough...

i just bought a 753c with 1500 hrs on it good clean tight machine however i am using a 72 inch bobcat grapple bucket on it and when i release the grapples on the bucket the right one will leak down the left one stays up also when i have the grapples clamped i dont seem to have enough pressure to...